It required a lot of internet searching, but I found a pretty good deal on like new, but used fenders and fuel tank cover for my Rancher. The rear fenders are severely cracked. Both fenders and the fuel tank cover are all sun bleached, so I decided to tackle this job of replacing the fenders and fuel tank cover. I recently had to remove the fuel tank cover to replace a fuel line on the top front of the tank, and I also replaced the fuel pump, which was much easier than I anticipated, but I believe I'm in for an extended job changing out the fenders. Any advice or tips is much appreciated; before I begin this job. I do have a 3/8 drive electric ratchet, so that should speed things up a bit, but I realize this isn't going to be nearly as fast as changing out a fuel line and fuel pump. Thanks in advance for your advice!!!