Discussion Starter · #1 ·
Have a 2003 450 Rancher with a Cycle Country Electric Lift (15-0600) and one of the 2 relays which raise and lower the plow is bad. I'm NOT wanting to replace the entire controller for a $6.00 relay but the relays are soldered in and I don't know which of the 2 are bad. Has anyone ever replaced these or am I better off to bite the $60.00 bullet and buy a new controller? Not looking forward to that being a retiree on a very fixed income. I know it's one of the relays because I took apart the winch, cleaned and greased the gearing, touched up the brushes and bench tested it in both directions while using a battery. Is there a way I can pull the covers off the relays and perhaps touch up the contacts?
67.5 KB Views: 198