Honda ATV Forum banner

Valve Seals?

3286 Views 7 Replies 4 Participants Last post by  shadetree
I have a leaky valve seal how hard is it to replace them? its an 87 TRX250x
1 - 2 of 8 Posts
It's not hard, but you will have to take the head off and you will probably need a valve spring compressor tool to compress the springs and put the cotters (keepers) back in place.
And don't turn the springs backwards when you reinstall them.
1 - 2 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.