Honda ATV Forum banner

TRX200D Kinpin Bush Replacement

776 views 2 replies 2 participants last post by  neilriach 
They should come out pretty easy using a drift punch. If you're worried about buggering up the knuckle bores you could try to use a hardwood (or polycarbonate plastic) round dowel to knock them out. The worn kingpin could be used to drive them out as well. Tap around the inner diameter of the bushes in four places to gradually walk them out.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top