[Bob Probert32]

i have a 2008 trx 700xx i just got it and i love it. I have a question i bent the rear rim almost in half i think the tire is fine but a new 11 inch rim from honda is almost 400$ a little to much for me but i have heard there isnt any company making a 11 inch rim for those tires. So i thought about buying two 10 in rims and tires to put on the atv but i have been hearing that the bolt pattern is different or something so the aftermaket rim wont fit on the TRX. does any one know anything about this that could give me some help?

 

[Helmut]

The bolt pattern for the rear of the 700XX is 4/144 and the rear on most Hondas is 4/110. The rim offset will also need to be for a IRS.

 

[Bob Probert32]

Sweet so what do you recommend i do cuz i dont think they make after market for this, i havnt really looked to much into it.

 

[Helmut]

Sweet so what do you recommend i do cuz i dont think they make after market for this, i havnt really looked to much into it.

I don't know what to tell you, because I don't really know what's available for the 700XX. We have a few guys on here that own a 700XX, maybe they can suggest something.

 

[Bob Probert32]

alright well thanks for all you help, im new to all this forum stuff so how do get ahold of these people or do i just wait till some one see this post?

 

[Helmut]

alright well thanks for all you help, im new to all this forum stuff so how do get ahold of these people or do i just wait till some one see this post?

I would give it a little time for them to see the post and somebody will probably answer. In the meantime, you might be able to use the "search" feature and find something about the rear wheels for the 700XX. I think I can remember the wheels being discussed a couple times, but I can't remember the details.

 

[Redracer]

ITP makes a 10" wheel that is designed for the 700XX. It has a wider offset to allow the full range of motion without hitting the a arms on the back. You will have to remove the little mud scrapers that honda put on the inside of the wheels.

ITP T-9 Pro Series
10x7
4+3 offset
Old Part Number- T174144
New Part Number- 1028430403

 

[Bob Probert32]

ITP makes a 10" wheel that is designed for the 700XX. It has a wider offset to allow the full range of motion without hitting the a arms on the back. You will have to remove the little mud scrapers that honda put on the inside of the wheels.

ITP T-9 Pro Series
10x7
4+3 offset
Old Part Number- T174144
New Part Number- 1028430403

thanks alot, im looking on the website for them and there not coming up with a 10x7 im sure if you say they have them, they have them im just going to call in the morning and see what they say. thanks alot man

 

[Redracer]

Here you go...

ITP .190 T-9 Pro Series Wheel | Rocky Mountain ATV/MC