Honda ATV Forum banner
1 - 9 of 9 Posts

·
Premium Member
Joined
·
7,533 Posts
Discussion Starter · #1 ·
OK this is some pics of what the cylinder and piston looks like on a 300EX im rebuilding for a friend. The rings was seized up in the piston, the cylinder wall steal had the honing marks from when it was built from the factory.Lots of carbon build up. Had 80 lbs compression. Sorry for the crappy pics.





 

·
Super Moderator
Joined
·
18,228 Posts
I would still bead hone it with some WD-40 to clean up the glazing, wire wheel the head and spray everything out real good. A new piston and ring kit and you'll be up and running in no time. here is what you need the CR is a little more

Wiseco Part#: PK1026
Product Type: Piston Kits
Description: '92-06 Honda TRX300EX 74.0mm (4574M)
Displacement: 282cc
Bore - Standard: 74.00mm
Bore - Actual: 74.00mm
Bore - Oversize: STD
Stroke: 65.5mm
Compression Ratio - Actual: 11:1
Valve: 4
 

·
Premium Member
Joined
·
23,581 Posts
1 - 9 of 9 Posts
Top