[[email protected]]

Drove 4 hours to west virgina first 2 miles damn eletric shifter thing started cutting out and transmission is now f----- up I shift to 3rd and gave it gas and it goes right back into second is there any way to manuel shift this thing on my honda 420 rancher 07

 

[tomgodd]

I am not sure.... It may have a back up shifter on the left side of the engine. If it has one it will be a spline shaft down near the foot peg area. I am not sure but some models do have this. I don't know if this can be used for the rest of the quads life with out damage.
Someone will be along with more Knowledge of the machine.

 

[Helmut]

It should have a shaft on the left side of the engine at the bottom, near the back. It won't have splines, though. It is hex shaped and is made to use with the temporary manual shifter that comes with the ATV. If you don't have the temporary shifter, you can use a wrench or socket and ratchet, I believe it's a 12mm. This is just to put it in a better gear, so you can get it home if it hangs in gear. It's not made to permanently shift, like a foot shift.

 

[tomgodd]

Thank you helmut for giving the proper info!
Thanks Again,
Thomas

 

[jeffnott]

if its like 2010 model the back up shifter is on the front of motor on the lower part of the clutch cover. not sure about 07 but not much different then the 10s

 

[Helmut]

if its like 2010 model the back up shifter is on the front of motor on the lower part of the clutch cover. not sure about 07 but not much different then the 10s

Yeah, it's probably the same. I was thinking about the 350 Rancher.