Honda ATV Forum banner
1 - 8 of 8 Posts

· Registered
Joined
·
59 Posts
Discussion Starter · #1 ·
New to forum but not new to Honda...Looking forward to finally fix my 2013 Honda 420 Canadian Trail Edition after the warranty is up in October 2017 especially when Honda charges 82 bucks Hr....Since 2013 the only thing that broke in 4 years are the small little front ball joints they decided change them all for free....also it only has 6800 KM on it

Land vehicle All-terrain vehicle Vehicle Automotive tire Tire
 

· Registered
Joined
·
2,918 Posts
Hi: Big Welcome -- you are enjoying your bike (6800 Km) drive safe -- have fun.
 
  • Like
Reactions: rustneversleeps

· Registered
Joined
·
59 Posts
Discussion Starter · #3 ·
thanks man ...Been lurking this site for a while so i figured i join the fun....I see your in the same province as me what are the odds that you replied and from Newbie too, cool... Oh yes i enjoy it very much was almost tempted to trade it in for 2013 680 Honda but change my mine for now...
i like my 420 but is it a Rancher or TRX and what are differences..
Manual says front cover TRX420PG Fourtrax AT with GPScape and Power Steering and switchable ESP
Are they all Ranchers.....Updated my info......
 

· Premium Member
Joined
·
5,072 Posts
Welcome to the forum.

You did well getting a freebie from main dealer, good job :)
 
  • Like
Reactions: rustneversleeps

· Registered
Joined
·
2,918 Posts
Hi: Your bike is a TRX420 FPA -- look on the left side front frame you will find ID there for parts if needed.
The Canadian Trail Edition bikes were redesign in Quebec -- they were tested there and put through the roughs trails -- damage was found on parts -- those parts were sent back to the factory machined and sent back to Quebec and try again until they got things right.
If you need a Service manual
http://www.hondaatvforums.net/forums/honda-atv-schematics-manual-help/
 
  • Like
Reactions: rustneversleeps
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top