while looking online in search for the swing arm bearings for 2004 rancher tm. there is two types of bearings to be seen. one set is the typical bearing set up. the other has a sleeve to set the bearing into it when installed. Which one should I get?
swing arm bearings
1 - 2 of 2 Posts
Joined
·
5,072 Posts
One will be taper roller the other will be ball bearing, both types are good providing you buy a known good brand. I’d be tempted to source them from the likes of Partzilla etc.
I fill the bearings with waterproof grease and also fill the cavity in the frame with waterproof grease in an attempt to prolong the life of the retainer threads.
I fill the bearings with waterproof grease and also fill the cavity in the frame with waterproof grease in an attempt to prolong the life of the retainer threads.
1 - 2 of 2 Posts
