stuck brake on an 87' 250x

5481 Views 22 Replies 6 Participants Last post by mud99, Mar 1, 2010

jsmay

Discussion Starter · Feb 18, 2010

my front left brake is hanging up... i removed it and can push the piston back and seperate the brake pads but when i remount it and hit the front brake it doesn't release on the left side and i cant spin the front hub.....at all completely frozen. any help would be great..

thanks jason

1 - 4 of 23 Posts

mud99

· #2 · Feb 18, 2010

You could have a bad brake line. or caliper needs replaced.

mud99

· #12 · Feb 21, 2010

temmorg said:
if the lines are like car lines they can break inside letting fluid in but not out and locking your breaks up

This is true. If there is a bad place in the line I would definitely replace it.

mud99

· #15 · Feb 21, 2010

Basically the same thing about the inside coming apart.

mud99

· #23 · Mar 1, 2010

Glad you got it fixed.

1 - 4 of 23 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.