Honda ATV Forum banner

stuck brake on an 87' 250x

5479 Views 22 Replies 6 Participants Last post by  mud99
my front left brake is hanging up... i removed it and can push the piston back and seperate the brake pads but when i remount it and hit the front brake it doesn't release on the left side and i cant spin the front all completely frozen. any help would be great..

thanks jason
1 - 2 of 23 Posts
if the lines are like car lines they can break inside letting fluid in but not out and locking your breaks up
your right if your getting the parts cheap i would do the same thing,its already taken apart so why not
1 - 2 of 23 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.