Honda ATV Forum banner

Steering Stem bearing clip

2444 Views 5 Replies 5 Participants Last post by  Jeepwm69
What's like a previous owner replaced the steering stem bearing and used a circlip with no ears for circlip pliers.

Pretty sure it's frozen up in there with rust too.

Half submerged as much of it in PB blaster as I can to let it sit while I'm at work. Anyone have any tricks on getting this style of circlip out?

I've tried getting a flat head screw driver under the angled end and I have made no progress


See less See more
1 - 1 of 6 Posts
^^^Yep, something sharp and hard to tap on... Attack one end of the clip until it bends out toward the center where you can get behind it.
1 - 1 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.