[mjmny]

so yesterday i moved the oil cooler away from the radiator by 1/2" after reading the mod ideas on here. question i have is, i thought i read somewhere that somebody had made a special nozzle for their garden hose to be able to reach in between the oil cooler and radiator to clean it out....anyone have any ideas on this? it was a pain to take all that plastic off to get to the cooler.

also i just bolted the new bolts in, should i have done something to these bolts, something about the steel and the aluminum???

 

[unclejpl4x4]

What i did was remove the front nose plastic makes it easier to get the hose in there to clean. I used stainless steel bolts with anti-size on the threads.

O and welcome to the forums

 

[mjmny]

the plastic piece with four allen bolts and a small "mesh" area infront of the prescreen?

 

[unclejpl4x4]

yes thats the one

 

[ostrx250]

welcome mjmny

 

[Helmut]

Welcome to the forums.