Honda ATV Forum banner
1 - 1 of 16 Posts

· Premium Member
749 Posts
Roller chain wear should really be no more than1.5 / 2%. lay chain on a flat surface and push all the links together, IE, make chain as short as possible. Measure overall length of chain. Then stretch chain open, IE, make it as big as possible. measure it again. If the difference is more than 2% of total length then chain is scrap technically.
  • Like
Reactions: Wsg
1 - 1 of 16 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.