Honda ATV Forum banner

21 - 40 of 64 Posts

·
Registered
Joined
·
701 Posts
Of course it's blue.....
 

·
Registered
Joined
·
4,677 Posts
Thats tuff! but I don't think that a 300 , check out chrome bars, and vents just a head the riders knee, you can almost make out the right front swing arm spring/shock.... Looks lke an old school honda tank.
 

Attachments

·
Registered
Joined
·
7,152 Posts
Thats tuff! but I don't think that a 300 , check out chrome bars, and vents just a head the riders knee, you can almost make out the right front swing arm spring/shock.... Looks lke an old school honda tank.
Bill Birds custom 350D. Axles are not Honda, Samurai maybe if not something bigger.

 

·
Registered
Joined
·
4,677 Posts
Ya.... I was thinking Samurai too, check this front end shot out.
 

Attachments

·
Premium Member
Joined
·
6,489 Posts
Didn't take him long to build that 350 either. He had a 300 on portals that he sold back in the fall, and was looking for a 350D to build. Didn't take him but a couple of months to build that monster.

44's....

I'm only running 31's on my Jeeps, and 44's were a monster tire on a CJ. Now he puts them on a Honda.

Probably are Samurai axles. Lot of folks using those on custom smaller 4x4 applications.
 

·
Premium Member
Joined
·
12,368 Posts
Discussion Starter #26
Realistically , all that 350 / Samurai is good for is just what it did , going that 100 ft in a straight line to win the money
 

·
Premium Member
Joined
·
6,489 Posts
The 25K bounty hole pic I saw online yesterday had a Brute that sounded like a drag car that just skimmed over the top of the bounty hole.

Bill's bike looks too wide to have even gone through it, but I assumed that 25K hole is the one he was referring to when he talks about why he built that 350 beast. Not sure if there's any footage of him going through it.
 

·
Registered
Joined
·
7,152 Posts
The 25K bounty hole pic I saw online yesterday had a Brute that sounded like a drag car that just skimmed over the top of the bounty hole.

Bill's bike looks too wide to have even gone through it, but I assumed that 25K hole is the one he was referring to when he talks about why he built that 350 beast. Not sure if there's any footage of him going through it.


I read something about how it was too wide or something, basically he couldn’t do it, backed out of the hole and said he was done. Not sure on the details.

Big argument going back and forth about the brute, a lot of guys seem to think that he should have got the $25k and that the park doesn’t have the $25k to begin with.

Our local “mud park” had a bounty hole challenge for trucks and Atv’s with a prize of $100. Was about 4ft deep peanut butter. Seen a truck on tractor tires get buried in it didn’t think there was much sense in anybody trying it for $100. Not even American dollars lol.


Sent from my iPhone using Tapatalk
 

·
Premium Member
Joined
·
6,489 Posts
IMO, if the bike doesn't specifically break a rule, it counts. If the bike breaks a rule, they shouldn't let the bike compete in the first place. Once the let someone make a run, they shouldn't be able to disqualify them after the fact.

There parks need to clearly define the rules BEFORE they let someone make a run. Trying to change the rules after someone makes a run is bs.
 

·
Premium Member
Joined
·
2,673 Posts
the engine looks sum new. might fit the tiller. $5-10 if the engine if the engine runs good. e can keep the seat, an the rest. :smile
this post was directed to the 1st post in the thread.
 

·
Registered
Joined
·
1,357 Posts
Redneck snow conversion I put together this winter from a set of 2 tracks and skis I picked up. By the time we got it done though, most snow was gone. Did get a chance to try it out myself twice and it goes through surprisingly deep snow. Could definitely feel the extra weight in the front end of the 4wd Rancher weighing it down though. Next year I will be bolting it onto a 2wd Honda. It's way slower than an actual snowmobile, but I was just looking for something to get around the property on during the winters we have too much snow for 4wd atv's. And I have trouble operating standard snowmobiles so this seemed like a project worth trying. So far I'm glad I did it.



 

Attachments

·
Premium Member
Joined
·
12,368 Posts
Discussion Starter #35
Did you'll every see a crane called a Monican , it walks like a duck , looking at Wheels' ski machine , makes me think of sticking it in 4wd and walking along -----
 

·
Premium Member
Joined
·
2,673 Posts
How do you get on it ?
how far do you roll when it falls over? looks like a 20' roll, after the seat hit's the ground. :smile
least ya fall up-hill... come to think of it, it it falls down hill, might make a 50 foot roll..
 

·
Premium Member
Joined
·
12,368 Posts
Discussion Starter #40
June Winner of Redneck ATV of the month

OOC Chopper rear end and some clone looking front end grafted together with what looks to be a good quality Crosby 7 1/2 ton shackle , no cheap Chinese shackle here , a 3hp edge engine , clutch , sprocket and chain and you got you a fine machine
 

Attachments

21 - 40 of 64 Posts
Top