Honda ATV Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
I have a 2007 Recon 250ES and I think the clutch is going out. Stays in gear when going uphill but will slip into neutral when going down a hill if not giving gas. Tried to adjust the clutch adjustment screw with no change. Do you think both clutches need to be replaced?
 

·
Premium Member
Joined
·
5,956 Posts
It sounds like the one-way roller clutch in the centrifugal clutch drum is failing. That one-way clutch provides engine braking when decelerating. If you can get it to grab sometimes by blipping the throttle then you'll know for sure.

You can get a copy of the service manual HERE for service/repair steps and reference.
The one-way clutch is part #27 on this page:
https://www.partzilla.com/catalog/honda/atv/2007/trx250te-a-fourtrax-recon-es/clutch

See attached images...

Welcome to the forums!
 

Attachments

1 - 4 of 4 Posts
Top