[PAC3]

Doc im not exactly sure what I did or how I did it, but I’ve done something. I’m oretty sure I blew seals but can anyone tell me based off the pictures what exactly I did and how to fix it? Anybody have a write up for whatever the issue/fix is, please send it my way! Anything helps!

 

[fishfiles]

looks like it is time for a seal and bearing job , what model atv is that on ?

 

[PAC3]

It’s an 07 420 4x4

 

[fishfiles]

here is the part break down of your rear end , Goober on this site has a bunch of srvice manuals on line if you don't already have one , it isn't really a hard job , some special tools make it easier , but you can hack thru it without them

https://www.partzilla.com/catalog/honda/atv/2007/trx420fm-2a-fourtrax-rancher-4x4/rear-final-gear

 

[PAC3]

Alright! Thank you!

 

[fishfiles]

so whats up Pac3 , what you going to do ?

 

[alloutdoors]

All the bearing/seals in the rear end have similar time, use and would suggest changing all of them when you get the axle out as well as seals.