[wrdabney]

i have a small problem with the rear brake lever on my '99 fourtrax 300. when i pull the lever it works properly and then when i let go of it the whole cable just slides out. It seems like there is something missing that is supposed to be holding the cable in place. I know that i did not explain this very well so here are some pictures to try and help. The silver aluminum piece in the pictures just slides out of the black part surrounding it when the brake lever is released. any ideas?

 

[mud99]

It looks like your missing the agjustment scrue for the cable.

 

[mud99]

Hear is a pic of mt rear brake leaver I hope this will explain what I was talking about.

 

[TRX2fiveO]

WOW Mud your camera needs glasses it's blurry...lol if you look on your camera it may be in the settings but look for a picture of a flower... that is Macro shot for close-up photography set the camera to that point at the item hold the button down about half way it may beep mine does then press it the rest of the way...... there photography 101...LOL

 

[mud99]

It does have a flower on it. I will go and have a retake hear in a few. Thanks. Ha I could use a coke bottle and hold it at the end of the camera. LOL

 

[mud99]

This is a much better pic.

 

[wrdabney]

That looks like what I need. Any ideas on where I could order just that adjustment screw

 

[Redracer]

WWW.bikebandit.com is gonna be one of your best choices.

 

[mud99]

Or go buy your local ATV shop not dealer and see if they have a used one laying around and compare prices.

 

[wrdabney]

Thanks for the help guys