Honda ATV Forum banner

rear brake help

3833 Views 18 Replies 2 Participants Last post by  Helmut
ok so two problems

1. my rear caliper wont go down when i use my c clamp.

2. my brake foot lever is very hard to push down and it wont receive back

help haha thanks
1 - 10 of 19 Posts
thank you! and where is the bleeder screw exactly? and how should i go about greasing the shaft? just take it apart?
wow you're very helpful. haha that helps so much with pictures.
just tried the bleeder. still wont go down. :(
just kidding a took it out and just put it on a vice and cranked it. but how do i get this shaft out?
like on the pedal opposite end of where your foot goes it like gets stuck and very hard to push and wont return to normal
It's almost like a shaft type thing that will push the brake fluid into the hose.
yes thats it! and see the thing all the way on the right? its like a shaft that moves up and down but its very hard too
how should i go about fixing this? just some spray lube and work it in by moving it up and down?
alright ill have to take a look at them. thanks for all your help! im sure ill be asking for more help in the near future!
1 - 10 of 19 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.