Honda ATV Forum banner

Rancher steering stem bushing

574 Views 2 Replies 2 Participants Last post by  Volusiacrazy
2002 Rancher 350. Ever since I've put this machine together the top steering stem bushing has been very tight and hard to turn. In the parts fishe it doesn't show any spacers between the mounts of the 2 halves of clamp that holds it in place but i stuck a small washer in between on both sides and it solved the problem. I haven't been able to figure out why it's like that and it makes me crazy. Anyone else came across this issue ?
1 - 2 of 3 Posts
I should have put grease in mine while the plastic was off but failed to do so, but it still turns 100% easier than it did.
1 - 2 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.