Honda ATV Forum banner

Rancher clutch

4578 Views 13 Replies 5 Participants Last post by  wheelsquad
I changed the clutches in my 2007 Honda rancher 400, now when I put it into gear it lunges forward and moves on its own, it does shift through all gears though please help
1 - 2 of 14 Posts
Its possible you installed the one way bearing the wrong way, and your centrifugal clutch is stuck open causing this.
  • Like
Reactions: 1
If it still lunges forward after installing the one way bearing in the correct orientation you could have the idle set too high, or your clutch needs adjusted.
1 - 2 of 14 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.