Honda ATV Forum banner
1 - 5 of 5 Posts

· Registered
Joined
·
8 Posts
Discussion Starter · #1 ·
Wheels appear darker, almost purplish compared to the bumper, both are gun metal with clear powder coat. The rims got the extra red stripe. Suzuki Vinson rims are the same size and offset as Honda factory rims. My ties were practically new, so I wanted to stick with the 12" diameter. My only issue is the dust caps. The wheels seal tight up against the hubs not much room for a lip on the dust caps. I was going to order som factory Suzuki caps and grind the flange off. I might have to glue them onto the rims.... any other suggestions?

Bike is an 05 ES, got it with 100 hours and 500 miles! I also put the black engine covers and skid plate on the bike.

[/url][/IMG]

[/url][/IMG]

[/url][/IMG]
 

· Premium Member
Joined
·
4,700 Posts
Looking real sharp! Thanks for posting some pics!
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top