Honda ATV Forum banner

poping in rearend

1156 Views 9 Replies 6 Participants Last post by  fishfiles
hi I'm new here. i have a 300 fourtrax 4x4 about a 95 model. just started hearing a popping sound coming from the rear end when making a turn. sounds like the 3rd member maybe the pinion and the ring gear is not meshed tight enough. i have not taken one of these apart yet. if this is the issue can i adjust this ? thank you for any help
1 - 1 of 10 Posts
I had the same issue. Very wise words to stop riding it and fix it immediately.

Your bearings are shot, you will only need new bearings and seals if you're lucky. I could move the whole axle inside the brake drum when I bought mine. Had to replace the braking mounting plate, drum, shoes, seals and bearings.
1 - 1 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.