Honda ATV Forum banner
1 - 3 of 3 Posts

· Registered
Joined
·
29 Posts
Discussion Starter · #1 ·
So guys I have a 1988 350d. While working around the house this summer it has developed a hard starting issue after running it. When it has a cold engine it hits as soon as I hit the starter button. After my initial run with the engine warmed up and turning it off the quad becomes impossible to start. If I let it sit overnight it will fire right up. Could a partially clogged fuel line be causing this?
 

· Premium Member
Joined
·
5,683 Posts
Your starter valve AKA choke valve AKA enrichment plunger sounds worn. Carb may need a rebuild too but Check it out it’s on the side of your carb. The seal should be pliable and conical. You can’t replace the seal itself buy the kit for $40.
Don’t cheap out trying something else these quads don’t like aftermarket parts.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top