try spraying a VERY SHORT burst of starting fluid into the back side of the carb, if it '' hits '' off this ?, then its a fuel issue. if it does not '' hit '' this way ?, then its a timing issue or compression issue.
O6 recon cranks has spark but wont start
I have 2 of these an 01 and an 06 the 06 cranks fine and has good spark but it won't even try to start. I have put known good cdi rectifier plug coiland caurb.nothing.please help.they both were running fine when they were parked 6 months ago
1 - 2 of 4 Posts
30 psi is wayyyyyyy too low for the motor to run.I have tried that. I think I found the problem.but.I didn't do the test right.I bought a compression tester and tested it today but I didn't hold the throttle wide open like I should have and maybe I should have put a little oil down inside the cylinder before I tested it.what do you think It only showed 30 pounds of pressure
1 - 2 of 4 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Honda ATV Forum
We’re a forum community dedicated to Honda ATV owners & enthusiasts. Come join the discussion about upgrades and reliability for your Rancher, Foreman, Recon, FourTrax, Pioneer, and more!
Full Forum Listing
Explore Our Forums
Recommended Communities
