[ks24]

Hello to all, I have a 2005 Foreman 500 ES The thing is looking at the front the left side is sitting lower and the top of that tire is sitting out it rides good just the looks throw me off. I have done replaced bearings seals checked the shocks all nuts made sure everything is tight. While I was changing the bearings I checked the whole frontend and did not see anything wrong but the left side is not as hign ?

 

[Helmut]

Welcome to the forums. I don't know what could be wrong unless something is bent.

 

[ks24]

Thanks Helmut .... Ball joints are alittle lose never been changed not sure if they are suppose to be, I was thinking maybe the upper are the lower arm could be bent ? Also I was maybe gunna replace the piece that the bearing sit in not sure whats that is called.

 

[dz5]

new to forums

hi i have a 87 250x any i have a pipe and jetted any other simple modifications i could do?

 

[Helmut]

Also I was maybe gunna replace the piece that the bearing sit in not sure whats that is called.

Are you talking about the part I circled in the diagram below? If so, it's called a knuckle.

 

[Helmut]

hi i have a 87 250x any i have a pipe and jetted any other simple modifications i could do?

Welcome to the forums. You will probably have better luck by posting your question in the "Performance Modifications" section. There are a few guys on here that have modded 250X that can help you.

 

[ks24]

yes that the part I'm talking about a Knuckle to me it seems like that could throw the tire off ... Thanks I will post there

 

[Helmut]

Thanks I will post there

When I said to post in the "Performance Modifications" section, I was talking to dz5.

 

[mud99]

Welcome to the forums

 

[69quadracer]

Welcome to the forums!

 

[MLR Synthetics]

Welcome to the forum.