My bike is a TRX500 fped 2013
It stopped suddenly last week and would not start again as there was no spark I tested regulator/rectifier and found a rubbed wire on a little box beside the main rectifier (not sure what that is) so solid in a new splice of wire and resealed I now have spark and checked injector and it's also firing fuel but still no start
Not sure what could be wrong so any ideas would be welcome
if its getting spark ?, and getting fuel to the throttle body ?, then the only thing left to keep it from starting is not enough compression ?, or the timing is off ?. may have a bent valve ?. do a compression test.