Honda ATV Forum banner
1 - 19 of 19 Posts

· Registered
Joined
·
24 Posts
Discussion Starter · #1 ·
Tim park hear from buford G.A what I got a 87 250x that I picked up for 300 bucks had a busted crank case cover wore out axle and swing arm berings fixed all of that then it starts to smoke bad real bad ...
 

· Premium Member
Joined
·
38,589 Posts
welcome to the forums, need any advice..you came to the right place !
 

· Premium Member
Joined
·
18,211 Posts
Welcome to the forums there are quite a few of us here that ride a 250X
 

· Premium Member
Joined
·
23,587 Posts
Welcome to the forums. Quite a few 250X riders on here.
 

· Premium Member
Joined
·
18,211 Posts
welcome to the forums, need any advice..you came to the right place !
Your not kidden this is THE place for good info
I am about to buy a piston and rings need a good cheap brand

Wiseco makes a great piston kit, Powroll.com as a few, try Dennis Kirk also but take it from me bro don't cheap out, I just wasted about 5 hours of labor because i took the short road.
 

· Premium Member
Joined
·
38,589 Posts
take trx's advice..don't go piston cheap..you may or may not come out in the long run..but..2 or 3 hours of cuss words ain't worth it..lol..go wiseco piston kit all the way..yeah..they are not cheap..but..if you install it right..and it runs right..it's worth every dollar for it !..make sure to coat your jug with fresh motor oil before you install the new piston and rings..makes it slide in alot easier, less chance of breaking your new rings this way.
 

· Premium Member
Joined
·
23,587 Posts
Yeah, always try to use quality parts on an engine. You will come out a lot better in the long run. Weak parts in an engine just won't last.
 

· Registered
Joined
·
2,732 Posts
Pro X pistons are good.Wiseco advertises them on there page.And welcome to the 250x family.
 

· Premium Member
Joined
·
18,211 Posts
Pro-X os Wiseco's second line affordable
 

· Registered
Joined
·
2,732 Posts
Go with pro X.
 

· Premium Member
Joined
·
18,211 Posts
I have a slightly used 76mm 12:1 piston, head and jug I can give you...lol Just Joking... It will be worth it to fix the engine these are really a fun ride.
 

· Registered
Joined
·
2,732 Posts
They sure are moose.
 
1 - 19 of 19 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top