Honda ATV Forum banner

Low voltage

2847 Views 6 Replies 4 Participants Last post by  Glennwill
Hey guys I’ve got a 08 Honda rancher 420 and the starter won’t spin when you push the button. Everything’s clean it starts when you bypass the solenoid with a screwdriver. With the solenoid wire disconnected from the starter I measure 5 volts to ground at the plug and moving up to the line side of the push button on handlebar it measures 5 volts. I’ve traced this wire back to the ECM and tested it and its output measures 5 volts or really close? Any help would be GREAT!
1 - 1 of 7 Posts
Hi: Go to the fuse box and check fuses main 30 amp fuse and Ign. 10 amp fuse -- here is how to do it -- turn key on -- leave the fuses in place -- look for a little gray dot on the top of the fuse -- test each gray dot to ground -- what did you find?
1 - 1 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.