[Chadcummings86]

Hello everyone, I have a 1985 atc110 the im restoring. My dad bought it for me and my brothers when we were kids. It’s been sitting in the garage since 2008. Put gas in it the other day and it fired right up. Awsome news. The head light and tail light are not light up. I changed the bulbs and still nothing. I could really use some help on this issue. Any suggestions? Thank you

 

[mrbb]

I would honestly say maybe start checking wires, that's a oldie there, and mice love to chew on wire insulation
so, time to maybe break out a meter and start following wires looking for damages

and welcome to the site!

 

[Goober]

Check fuses

 

[Chadcummings86]

No starter on my 110, does not have fuses. Any other ideas?

 

[shadetree]

time to start tracing wires for shorts. a 12 volt dc test light works great for fast testing. you need to get it running, then trace from stator to light switch, then to both headlight and taillight too see if your getting 12 volts through/to each bulb ?.

 

[mrbb]

what Shade said, and also, make sure all connections are clean (not corroded at all) and making good contact