[mac102004]

I use this but it wastes a lot of grease.

https://www.amazon.ca/Bearing-Packe...qid=1491867626&sr=8-7&keywords=bearing+grease

That lisle one you posted looks better. I think those ones in the 2nd link are nothing but a gimmick, the idea you can grease a sealed bearing without removing the seals all while leaving it in the knuckle seems kind of stupid. You basically do 90% of the work that you would do if you were actually replacing the bearings....

 

[mac102004]

The only reason I like the cone tool is that it does a good job of pushing the old grease out of the bearings, it's hard to do that by hand. Although I have cleaned out bearings with brake clean and repacked them with grease by hand before.


Sent from my iPhone using Tapatalk