If it’s like older carbs should look like this
Do you have the service manual? Link ink my sig block
Do you have the service manual? Link ink my sig block
Keihin VE94A pilot screw question '03 Rancher 350
When I took the carb apart, I don't remember seeing any of the items in the pic with arrows pointing to them. All I remember seeing on the pilot screw was the spring and an o-ring . What gives? I'm confused and I can't find a more detailed schematic.
Attachments
1 - 3 of 7 Posts
Sure the most highly recommended carb rebuild kit is from Shindy; I used an All Balls kit with no problems but others have had mixed results. Idk why some carb kit have one gasket and others don’t; you might also try your friendly Honda dealer
Clean that carb with pipe cleaners, swabs and get all the passages as best you can.
Edited to relevant 00-03 discussion
Clean that carb with pipe cleaners, swabs and get all the passages as best you can.
Edited to relevant 00-03 discussion
Attachments
1 - 3 of 7 Posts
