Honda ATV Forum banner

Is it possible my valves need to be loose

700 Views 5 Replies 4 Participants Last post by  Bubba3000
I've got a 03 300EX and every since I adjusted the valves, it sputters and dies at WOT. Ive since cleaned the carb at least 3x trying to get it right and it hasn't made a difference. Im thinking about just setting the valve out of spec again. Any advise?
1 - 1 of 6 Posts
if you have not changed the jets in the carb, then perhaps, the valves were not adjusted proper. i mess up all the time, so i might learn things proper. :smile, the school of hard knocks, is the only school, that ever teaches,,, ya dont even have ta enroll
1 - 1 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.