Honda ATV Forum banner

independent rear wheels set up?

15662 Views 15 Replies 7 Participants Last post by  Eric the red
Hey yall. I was a little bored so I was just looking at rims and tires for an atv with irs. What hit me was the offsets. Can the irs atvs still run the wider rims like the solid axle ones? or should both the offsets be the same and keep the same width tires?
1 - 2 of 16 Posts
Hey guys I just got a set of itp wheels for my 2019 Honda Rubicon 500 irs and they have a 5+2 offset on front and rear but the rear is sticking out like 3 inches past the fender on both sides. How can I fix this or make the front match the width. I'm lost and could use all the help I can get. Thanks
If I was to put a set of 26 x10x12 tires on all around and add 1-in spacers to the front would that even out the look from where the rear sticks out past the fenders??
1 - 2 of 16 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.