Honda ATV Forum banner
1 - 3 of 3 Posts

· Premium Member
Joined
·
38,589 Posts
yep, red^^^^^ is right, it's your carb heater spacer, goes on the heater sensor, screws into the bottom of the carb. make sure to unplug the connector ?, as you can unscrew the sensor to put that on with out unplugging the end from the wire harness.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top