Honda ATV Forum banner

How to seal airbox

26764 Views 10 Replies 8 Participants Last post by  Redleader20
I believe water is getting into my airbox through the lid when crossing deep water. I have a snorkel and differentials vented as well as the carb vented to the snorkel.

Using RTV gasket maker is it possible to still be able to open the airbox or do you need to break it apart each time? Im not sure if im supposed to apply it then stick it closed while wet, or apply it to the lid and the airbox let each dry then compress them closed? Any help appreciated.
1 - 1 of 11 Posts
I just got done testing a new sealant on my air box I used plumers putty and sealed it perfectly and was easily removed to see if water got in and it was perfectly dry inside I didn't want to use silicone on it like my buddies did
1 - 1 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.