Honda ATV Forum banner

How to seal airbox

26764 Views 10 Replies 8 Participants Last post by  Redleader20
I believe water is getting into my airbox through the lid when crossing deep water. I have a snorkel and differentials vented as well as the carb vented to the snorkel.

Using RTV gasket maker is it possible to still be able to open the airbox or do you need to break it apart each time? Im not sure if im supposed to apply it then stick it closed while wet, or apply it to the lid and the airbox let each dry then compress them closed? Any help appreciated.
1 - 1 of 11 Posts
wow! did my 1st snorkel today, and I sealed the air box with 100% black silicone.. I just ran a good bead along the inner grove on the lid, and put it on.. Didnt let it dry first.. Sure hope I can get the darn thing off!!!lol
1 - 1 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.