Honda ATV Forum banner

Hot Wiring 1986 TRX350

2946 Views 5 Replies 5 Participants Last post by  shadetree
I have a 1986 Trx350. it recently lost all power to the bars. After some digging I figured out the key switch was bad and only working sometimes. I really need the wheeler this weekend so is there anyway to hot wire it for now? The wires off the switch are as follows (not in any order) red, red/black, pink, black, green, black/white. Can I rig a toggle switch in there somewhere just for the weekend? I saw a picture of the black and green on one side of a toggle with the red on the other. when I connect black to the red or red/black the oil temp light come on, then goes out but no neutral light and no cranking. if I touch the green to the red or red/black it blows the fuses. If I can rig this thing up with a toggle switch what wires should be on either end of the switch? Thanks. Picture attached is what I found randomly in google images.

Attachments

See less See more
1 - 2 of 6 Posts
Lectricity is a junkyard dawg. Mistreat it one time and will chew the stuffing out of ya
  • Like
Reactions: 1
Plenty of switches available for these鈥揾ere鈥檚 one free shipping.

Attachments

See less See more
  • Like
Reactions: 2
1 - 2 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top