Honda ATV Forum banner

Honda recon trx250 runs but won't move in gear

6325 Views 7 Replies 4 Participants Last post by  Aaron_5
I have a 1997 Honda recon trx250 that runs good shifts fine but won't drive at all. I have adjusted the clutch the right way multiple times but no change. I have popped the back case and everything looked fine. I have the front case popped and narrowed it down to the clutch. The centrifugal clutch is fine but the second clutch is staying disengaged. The disks are staying with a big gap at all times and they're loose. When in gear only the middle of the clutch spins. It does not catch onto the disk. I don't exactly know why it's doing this any thoughts?


Sent from my iPhone using Tapatalk
1 - 8 of 8 Posts
the clutch adjustment is not right.
and welcome to the forums :).
What about the clutch adjustment


Sent from my iPhone using Tapatalk
Ok thank you


Sent from my iPhone using Tapatalk
Please remove 2 of your post...... Second request..

Sent from my LG-US996 using Tapatalk
How do I delete it


Sent from my iPhone using Tapatalk
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top