Honda ATV Forum banner

1 - 11 of 11 Posts

·
Banned
Joined
·
638 Posts
Discussion Starter #1 (Edited)
TELL YOUR FRIENDS!!

(96-01)H22a4 vtec prelude bare engine block. It was a hydro locked engine. It bent one of the piston rods but block in ok cond. WILL NEED A GOOD HONING DONE (CFM cyl walls) $220obo




I also have the crank shaft for this engine (55mm mains) $180obo
The crank is in GREAT cond. no scaring nor where any of the rod berings spun.



SHIPPING IN ON THE BUYER! I’m willing to work with you tho depending on the price of shipping.
 

·
Banned
Joined
·
638 Posts
Discussion Starter #3
.lol yeah.
 

·
Super Moderator
Joined
·
18,227 Posts
LMAO!!! Yeah but he posted the same blown up motor, boots and popcorn!!

Well look at that your the first poster hear flcb7 You finely made it to the top LOL
 

·
Banned
Joined
·
638 Posts
Discussion Starter #6 (Edited)
LMAO!!! Yeah but he posted the same blown up motor, boots and popcorn!!
But the motor has potential I just don't wanna f**k with it anymore. Iv dropped $2k for the engine swap and another $3-4k in parts JUST FOR THE MOTOR. So I’m thinking it's time to part ways...but if I don't end up selling it I MIHGT just re-sleeve it and boost that bottom end after a while. Since it has a bigger bore (87mm) than my F22 block (85mm)
But the sleeves alone are $700 plus the labor to bore out my old cyl walls and press the new ones in. So for the $1500 I could spend on making this engine a monster I could buy a whole new h22 WHOLE SWAP (the whole prelude engine bay..I mean everything) for $2k
And with the $1500 I'd spend I still have to get new pistons rods...a good piston rod combo is gonna be another grand...F**K I need more money! ahh building cars become a pain in the @ss sometimes.

Also if anyone is interested at this point I’m willing to take a good bit off the price...I really need this gone. Got way too many parts laying around.
 

·
Banned
Joined
·
638 Posts
Discussion Starter #8
Nah not really...you can spend less than $500 to bring this engine back to OEM spec. if you have the head. Used rod's and pistons are fairly cheap then all you need is a good hone and bam you back to 200hp. I don't want 200hp I want at least 300whp on this next build.
 

·
Banned
Joined
·
638 Posts
Discussion Starter #9
If anyone is interested in this engine I will let it go for a crazy cheap price. Come on yall know you wanna swap this out for your little rinky dinky 1 cyl engines...lol
But in all serious I will let it go really cheap I need some money.
 

·
Banned
Joined
·
638 Posts
Discussion Starter #11
hell yeah vtec yo!..lol
 
1 - 11 of 11 Posts
Top