Honda ATV Forum banner
1 - 1 of 6 Posts

· Registered
7,087 Posts
Pull cover off and check the one way, and check the clutch plates, make sure nothing is stuck between the basket and pressure plate. I had my 1994 apart putting a GR in recently and ended up taking it apart 5 times before I figured out that the loc-tite I had used (on the 4 small bolts on the change clutch) had ran down and hardened on the face of the basket. I could not figure out what was going on and was sure it was a centrifugal issue rather than the change clutch...
1 - 1 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.