Honda ATV Forum banner
1 - 15 of 15 Posts

· Registered
Joined
·
746 Posts
Discussion Starter · #1 ·
ok today im trying to get my front end on my honda 300 loose, so i can slide it forward so the yoke comes out of the front of the motor. I got the bolt on the top of the front end off and the bolt on the bottom on the front side off, but i believe there shold be 2 more but i cant find them. Im assuming they are on the back side of the front end, but to get to them do i need to take my bottom a arms off to get to the bolts or am i just nto seeing them?
 

· Registered
Joined
·
3,546 Posts
Warn makes a push-pull cable that attaches to front end to disengage the 4 wheel so you can switch from to all wheel to 2 wheel around 300 bucks they work really good.
 

· Registered
Joined
·
3,546 Posts
I think that has been discontinued. No market for it since all the new ones have that built in already.
You can still order them.
 

· Registered
Joined
·
3,546 Posts

· Registered
Joined
·
746 Posts
Discussion Starter · #11 ·
yeah i got 1 on top and 1 on bottom on the front side i can only find 1 more on bottom on backside between the a arms. I want to keep 4x4 so i just need to move forntend forward to get yoke out of engine so i can move it forward off the reqr end so i can take motor off frame
 
1 - 15 of 15 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top