[JSD76]

Hello everyone this is my first post on here and I can't wait to start using this forum. First thing is my 07' Foreman 500 I'm about to attempt to build a snorkel for, sounds fairly simple but, before I start I would appreciate any advice, instructions, pictures or anything else you all can think of that may be helpful.

 

[jeeping1974]

I'd build it out of PVC pipe, just make sure that you test fit everything before glueing it. make sure that you use the primer as well as that helps to soften the plastic and helps the glue act more like a weld than glue.

 

[TRX2fiveO]

and use Stainless steel clamps if you have to use any get those at a marine supply store. And don't be shy with the purple primer or glue.

 

[jrfonte]

build it out of 2" pvc so you get enough air flow with the longer run for the intake.
here these links should help you out some its the snorkle i built for my 07 500 foreman.
http://www.hondaforeman.com/index.php?showtopic=354&view=findpost&p=121189
http://www.hondaforeman.com/index.php?showtopic=354&view=findpost&p=121193