Honda ATV Forum banner

1 - 1 of 1 Posts

1 Posts
Discussion Starter · #1 · (Edited)
2010 Honda Rincon 680 fuel injected

1. No spark while cranking (won’t start)
2. Replaced coil, ecm, spark plug, spark plug wire.
3. Do I need to reset the ecm? If so how? I tried the hold up down shift at the same time thing. It didn’t go into flashing “N”. Tried 6 or 7 times to do it.
4. It will get spark from time but it’s intermittent. One day it will run good. The next day it won’t start at all.
1 - 1 of 1 Posts