Honda ATV Forum banner

Hello all!

703 Views 7 Replies 6 Participants Last post by  TBRider
Thanks for the add! I'm looking for advice on replacing the cam on a 07 500 rubicon that belongs to my dad. Usually my brothers do all the ATV maintenance but have moved away, and left it dismantled. Any and all advice with be appreciated!
1 - 1 of 8 Posts
I would get a copy of the service manual and read it thru the section on the area you will be working on a couple of times and ask some questions about things you don't feel comfortable with before diving into it , take pics along the way to help you remember where everything goes , use baggies to separate bolt to keep them organized

If I were pulling the cam on an engine , it would include redoing the head , cam chain , sprocket maybe , jug work or replace , piston , and being the cam needs replacing ( depending on for what reason ??? ) I would look close at the oil pump
  • Like
Reactions: 1
1 - 1 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.