Honda ATV Forum banner

Greenhorn to the site need 420 help.

2372 Views 8 Replies 7 Participants Last post by  Curry10
The rear end on my 420 finally failed. I tore it down today to find everything is pretty much destroyed.

The spline on the rear drive shaft at the pinion gear is stripped. Thus drive shaft will need to be replaced. The pinion gear as well is tore up. The ring gear is scrap metal. All the bearings/seals/o-rings...pretty much gonna need a whole new rearend. Any body know wher I could get a whole assembly at a good $$$. The axle shaft was not damaged. Any help from you guys is welcome and would greatly be appreciated. Thank from the dirty south!
1 - 1 of 9 Posts
Wow...I can't imagine the rear end going out so quickly. Hopefully it was from the tires and not inadequate parts. Welcome to the site...let us know how it goes.
1 - 1 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.