Honda ATV Forum banner

Greenhorn to the site need 420 help.

2370 Views 8 Replies 7 Participants Last post by  Curry10
The rear end on my 420 finally failed. I tore it down today to find everything is pretty much destroyed.

The spline on the rear drive shaft at the pinion gear is stripped. Thus drive shaft will need to be replaced. The pinion gear as well is tore up. The ring gear is scrap metal. All the bearings/seals/o-rings...pretty much gonna need a whole new rearend. Any body know wher I could get a whole assembly at a good $$$. The axle shaft was not damaged. Any help from you guys is welcome and would greatly be appreciated. Thank from the dirty south!
1 - 1 of 9 Posts
Welcome to mi casa. What year is your rancher? It sounds like a lot of damage.
1 - 1 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.