Honda ATV Forum banner
1 - 3 of 3 Posts

· Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Hi, I have a 2004 Honda TRX 500FGA forman Rubicon,. I just recently had to replace the Digital combination Meter assembly model 37200-HN2-A11. Does anyone know how to calibrate the GPS or know where I can find instructions to calibrate it? Thx Joe
 

· Premium Member
Joined
·
5,960 Posts
Is the GPS indicator flashing?

Reset the receiver first by disconnecting the negative battery cable from the battery.

Turn the ignition switch on and leave the battery disconnected for about 1 minute.

Turn the ignition switch off and reconnect the negative battery cable.

Turn the ignition switch on and wait for 5-8 minutes for the receiver to sync with GPS sats. Do this outdoors away from thick tree canopy where there is no overhead cover.

If your indicator is flashing on the display you'll need to troubleshoot it. See the attachment from section 22 below..

You can find a copy of the service manual linked here:
https://drive.google.com/drive/folders/1GcqS65GYd3yFmEAGsI7LP-eZp2jMRVJU?usp=sharing

Let us know how it goes.
 

Attachments

· Premium Member
Joined
·
12,712 Posts
Retro , jumped all over that GPS sync problem , Bravo !!!!

I love my GPS , I got all the mud holes that will swallow you up marked with way points , I have all the trails marked with bread crumbs , when I get back from a ride I can upload the trip to Google Earth and view where I went , Mel hooked me up with how to use Base Camp
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top