Honda ATV Forum banner

Got my 2003 Rincon

6402 Views 7 Replies 4 Participants Last post by  elmerkit
Hello to all. I bought a non running rincon. Took motor apart and replaced rings, timing chain, guide, tensionor, oil pump chain and orings. Also misc other orings and of course the head gasket and other major gaskets for the top end. It runs great! I have no shifting in auto mode. I'm thinking its because the speedo is not working. I get no code for the speed sensors though. Actually I'm getting no codes at all. I unplugged the TPS sensor and it gave me the code for that so I'm thinking the diagnostics are functioning. Anyhow just trying to see if anyone here has had similar issues. I like running it in manual though. I just like to have everything working. Next I am replacing the front wheel bearings and a cv boot on the left rear. Front brakes need work too. Have any of you guys tried the disc conversion kit sold on here? Guess I'm rambling now? Let the games begin!!
1 - 1 of 8 Posts
Hi there and welcome. if the diagnostic check is working then may be it not a electrical problem or maybe is a mechanical problem.... try to rest it then recheck for any errors.
1 - 1 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.