Front brake issues

1134 Views 4 Replies 3 Participants Last post by retro, Jun 22, 2017

Hooppie

Discussion Starter · Jun 22, 2017

I have a 2005 Rancher ES 4X4 the front brake adjusters were adjusted all the way out I tried adjusting them back in and no brakes I bled the brakes no air I can get pressure when I pump the handle I adjusted all the way in with adjusters as soon as I let off no pressure no brakes what's next or anything I missed trying, thanks in advance

Save

1 - 2 of 5 Posts

retro

· #2 · Jun 22, 2017

Could be worn out brakes, air in the system, bad master cylinder or maybe something else. You'll probably need to take the hubs off and check them out. If you need the service manual you can get a copy HERE.

Welcome to the forums!

Save

retro

· #5 · Jun 22, 2017

If the brakes were accidentally adjusted the wrong way, on some models it is possible that the adjusters may have lost contact with the shoes, so that adjusting them has no effect. If so, you can take the drums off and put them right back together. You may want to look things over in there anyway...

Save

1 - 2 of 5 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month